The PROCAB TST200 Cable Tester comes with all audio and
electronics industry standard inputs, such as XLR Male/Female
(3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA,
Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender'
and 'Receiver' units, which are able to be locked together for
ease of transport, or split apart for testing cables at either end
of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B"
side of the device, then select your mode to check signal
continuity across all active pins or conductors. The brightly
coloured LED's will light up indicating signal continuity and
which pins are connected together. The inbuilt speaker of the
TST200 also beeps when a successful connection is made
between the Sender and Receiver units. If not all connections
are made, no beep will sound, and the faulty connection's LED
will not be lit.
Thanks to the split unit design means you can test both cables
you have on hand, as well as longer cables that are already set
up. This time saving feature removes the hassle of packing
down your cables just for testing. The sender unit (B) includes a
switch to select the speed in which the connections are tested,
as well as the power switch.
This two-part cable tester is reliable and durable, whether it be
on the road or in the studio. Both the A and B units are
powered separately, and each side requires 9V battery power